Complete guide to industrial washers: 304/316 stainless steel flat washers, spring lock washers, heavy duty flat washers, and anti slip patterned washers. Wholesale pricing.
304 & 316 Stainless Steel Flat Washers
Flat washers (also called plain washers, DIN 125 / ISO 7089) distribute the load from a bolt or nut over a larger母材 area, reducing bearing stress on the母材 surface. 304 stainless steel flat washers (A2 stainless, 18-8 composition) provide good corrosion resistance for general indoor and outdoor applications. 316 stainless steel flat washers (A4 stainless, with 2-3% molybdenum) provide superior chloride resistance for marine, coastal, and chemical processing environments. Both grades are passivated for enhanced corrosion resistance. Ultra thin micro precision flat washers (0.1mm to 1.0mm thickness) are available for precision instrument and electronics applications where standard washer thickness would interfere with close-tolerance assemblies.
Spring Lock Washers and Anti Lock Spring Washers
Spring lock washers (also called split washers or spring washers, DIN 127 / ISO 14315) are designed to provide spring tension that resists loosening from vibration. The split (or external star) design creates radial spring action when compressed. 316 stainless steel spring lock washers are used in marine and corrosive environments where standard zinc-plated spring washers would rust. The industrial metal spring anti lock washer also comes in shakeproof variants (internal or external tooth) that bite into the母材 and bolt/nut surfaces for additional locking. Important: Spring washers alone are NOT reliable for vibration resistance in critical applications—use with nylon insert lock nuts or positive locking mechanisms. Spring washers are most effective for maintaining preload under thermal cycling where differential expansion would otherwise loosen a standard nut.
Extra Large Flat Washers and Heavy Duty Flat Washers
Extra large flat washers (also called fender washers or extra wide flat washers) have a significantly larger outer diameter compared to standard flat washers, providing maximum load distribution for: soft母材 (aluminum, plastic, composite), oversized holes or slotted holes, and thin sheet metal applications where standard washers would still allow pull-through. Extra thick wide heavy duty flat washers (also called plate washers or bearing plates) are used in structural applications where not only the outer diameter is large but the thickness (typically 4mm to 12mm) provides rigidity to prevent bending under load. Structural plate washers for wood construction (ICC-ES approved) are used in seismic zones to prevent bolt pull-through in the wood. Available in zinc-plated carbon steel, HDG carbon steel, and stainless steel 304/316.
Anti Slip Patterned Metal Washers
Anti slip patterned metal washers (also called serrated washers, grip washers, or tooth lock washers) have serrations or teeth on either the bearing face or both faces that bite into the母材 and the fastener bearing surface to prevent loosening from vibration. External tooth washers (teeth on outside diameter) bite the母材 and prevent the washer from rotating with the nut. Internal tooth washers (teeth on inside diameter) bite both the母材 and the fastener head/nut to prevent rotation. Serrated flange washers are integrated into flange nuts for combined bearing area and locking in automotive applications. For wholesale supply, our stock includes plain, spring, and serrated variants in both inch and metric sizes.
Washer Selection Quick Reference
| Washer Type | DIN/ANSI Standard | Function | Best Application |
|---|---|---|---|
| Flat Washer (Standard) | DIN 125 / ISO 7089 | Load distribution | General use, prevent marring |
| Flat Washer (Heavy) | DIN 126 / ISO 7093 | High load distribution | Structural, oversized holes |
| Fender/Extra Wide | ANSI B18.22M | Max load distribution | Soft母材, thin sheets, slots |
| Spring Lock (Split) | DIN 127 / ISO 14315 | Spring tension/vibration | Thermal cycling, supplemental lock |
| Tooth Lock (External) | DIN 6797 | Anti-rotation bite | Moderate vibration, sheet metal |
| Tooth Lock (Internal) | DIN 6798 | Anti-rotation bite | Soft母材, painted surfaces |
| Serrated Flange | DIN 6926 | Bearing + locking | Automotive wheel, structural |
Frequently Asked Questions
Do spring washers actually prevent loosening?
Spring washers provide limited vibration resistance. For critical connections, use nylon insert lock nuts or all-metal prevailing torque nuts. Spring washers are best for maintaining preload under thermal cycling.
What size washer for a M10 bolt?
Standard M10 flat washer: 21mm ID × 40mm OD × 3mm thick (DIN 125 Form A). Heavy duty: 21mm ID × 60mm OD × 6mm thick.
Get Industrial Washer Wholesale Prices
Request Quote