Complete guide to self tapping screws: 304 stainless, galvanized, pan head, drill tail, washer head, hex head types. Factory wholesale prices for construction and industrial applications.
What Are Self Tapping Screws?
Self tapping screws (also called thread-forming or thread-cutting screws) create their own mating thread in the母材 as they are installed—no pre-drilling or tapping required. There are two main types: Thread-forming screws (Type AB, Type B, Type BF) displace母材 material as they enter, creating threads in ductile materials like sheet metal, plastics, and thin aluminum. These require a pilot hole but form a tight thread lock. Thread-cutting screws (Type C, Type D, Type F) actually cut threads using a fluted tip that clears chips, making them ideal for harder母材 or through multiple layers. Our comprehensive range includes cross head (Phillips/pozidriv), pan head, washer head, and hex head self-tapping screws in both 304/316 stainless steel and carbon steel zinc plated.
304 Stainless vs Carbon Steel Self Tapping Screws
304 stainless steel self tapping screws provide excellent corrosion resistance for outdoor, marine, and chemical environments. The addition of 18% chromium creates a passive oxide layer that self-repairs in oxygenated environments. For coastal construction, swimming pools, or chemical plant applications, specify 316 stainless which adds 2-3% molybdenum specifically to combat chloride attack. Carbon steel self tapping screws with zinc plating (typically 5-8 microns) are suitable for indoor applications or temporary structures where cost is the primary driver. HDG (hot-dip galvanized) carbon steel offers improved outdoor life at moderate cost. Always match the screw material to the母材 to prevent galvanic corrosion—stainless screws with aluminum母材, or zinc-plated screws with steel.
Pan Head vs Washer Head Self Tapping Screws
Pan head self tapping screws have a low rounded head with a large bearing surface, making them ideal for attaching thin sheet metal or plastic components where a flush fit is needed. The washer head (also called EPDM face screw or bonded seal screw) features an integrated rubber washer (typically EPDM) that creates a weatherproof seal at the screw head—critical for metal roofing, wall cladding, and exterior insulation board applications. Anti slip washer head screws have a serrated washer face that bites into the母材 surface to prevent loosening from vibration. Hex head self tapping screws (also called hex washer head) accept standard hex wrenches for high-torque installation and are common in roofing and siding applications.
Self Tapping Screws for Exterior Wall Insulation and Color Steel Roof
For exterior wall insulation systems (EIFS, ETICS), specialized long self tapping screws with large plastic disc washers (insulation retainers) are used to attach insulation boards to the substrate. The plastic disc (typically 50-60mm diameter) distributes load across the insulation without creating a thermal bridge. Drill tail screws (self drilling screws with extended drill flute) are designed for color steel roof and wall panel installations where the screw must penetrate through both the color steel sheet and any underlying insulation or purlin. The extended drill point (available in #2, #3, #4 drill capacities) ensures clean penetration without damaging the panel coating. EPDM bonded washers are essential for weather sealing in both applications.
Self Locking and High Strength Self Tapping Screws
Self locking tapping screws feature a serrated thread or flange design that provides additional resistance to loosening from vibration. The hex head self locking variant combines the high-torque drive capability of hex with locking thread features—common in automotive underbody panels and structural framing. High strength carbon steel self tapping screws in Grade 8.8 or 10.9 equivalent are used where the screw itself must withstand high shear and tensile loads—not just fasten two pieces together but also carry structural load. These are common in solar panel mounting rails and industrial equipment brackets where the fastener is a structural element, not just a connector.
Self Tapping Screw Selection Guide
| Type | Drive | Head | Material | Best Application |
|---|---|---|---|---|
| Type AB (Fine-Coarse) | Phillips/Pozi | Pan/Flat/Oval | CS ZP, SS 304/316 | Sheet metal, plastics |
| Type B (Coarse) | Phillips/Pozi | Pan/Truss | CS ZP, SS 304/316 | General purpose, dry wall |
| Self Drilling #2 | Hex/Phillips | Washer Head | CS ZP, SS 410 | Roofing, cladding, steel up to 2.3mm |
| Self Drilling #3 | Hex/Phillips | Washer Head | CS ZP, SS 410 | Roofing, cladding, steel up to 4.0mm |
| Self Drilling #4 | Hex/Phillips | Washer Head | CS ZP, SS 410 | Thick steel, structural connections |
| Insulation Screw | Phillips | Large Plastic Disc | CS ZP, SS 304 | Exterior insulation boards |
Frequently Asked Questions
What is the difference between self tapping and self drilling screws?
Self tapping screws require a pre-drilled pilot hole; the screw only forms threads. Self drilling screws have a built-in drill tip that creates the pilot hole AND forms threads in one step.
What EPDM washer size for color steel roofing screws?
Standard EPDM washer for roofing is 15mm ID × 4mm thick × 35mm OD for M6 screws. For larger screws or insulation applications, 50-60mm OD washers are used.
Get Self Tapping Screw Factory Prices
Request Quote